debian_preseed/preseed.cfg

#### Contents of the preconfiguration file (for wheezy)
### Localization
# Preseeding only locale sets language, country and locale.
d-i debian-installer/locale string fr_FR
d-i keymap select fr
 
### Network configuration
# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
d-i netcfg/choose_interface select auto
 
# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string preseeddebian
d-i netcfg/get_domain string preseeddebian
 
# Disable that annoying WEP key dialog.
d-i netcfg/wireless_wep string
d-i hw-detect/load_firmware boolean false
 
### Network console
# Use the following settings if you wish to make use of the network-console
# component for remote installation over SSH. This only makes sense if you
# intend to perform the remainder of the installation manually.
#d-i anna/choose_modules string network-console
#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
#d-i network-console/password password r00tme
#d-i network-console/password-again password r00tme
 
### Mirror settings
# If you select ftp, the mirror/country string does not need to be set.
#d-i mirror/protocol string ftp
d-i mirror/country string manual
d-i mirror/http/hostname string ftp.fr.debian.org
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string
 
# Suite to install.
d-i mirror/suite string testing
 
### Account setup
# Root password, either in clear text
d-i passwd/root-password password echo0022
d-i passwd/root-password-again password echo0022
 
# To create a normal user account.
d-i passwd/user-fullname string garfi
d-i passwd/username string garfi
# Normal user's password, either in clear text
d-i passwd/user-password password echo0022
d-i passwd/user-password-again password echo0022
 
### Clock and time zone setup
# Controls whether or not the hardware clock is set to UTC.
d-i clock-setup/utc boolean true
 
# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string Europe/Paris
 
# Controls whether to use NTP to set the clock during the install
d-i clock-setup/ntp boolean true
 
#Seul le premier disque est partionné
d-i partman-auto/disk string /dev/sda
# On partionne en "normal": pas de RAID ni de LVM
d-i partman-auto/method string regular
# Pour être sûr, on supprime une éventuelle configuration LVM
d-i partman-lvm/device_remove_lvm boolean true
# Même chose pour le RAID
d-i partman-md/device_remove_md boolean true
# Chaînes pour ne pas toucher la configuration LVM (donc pas de configuration)
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# L'installation sera simple: on fout tout dans une seule partition
d-i partman-auto/choose_recipe select atomic

# On valide sans confirmation la configuration de partman
d-i partman-md/confirm boolean true
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

# fstab utilisera des UUID plutôt que des noms de périphériques
d-i partman/mount_style select uuid
 
# The kernel image (meta) package to be installed; "none" can be used if no
# kernel is to be installed.
d-i base-installer/kernel/image string linux-image-amd64
 
### Apt setup
# Choisissez si vous voulez analyser un autre support d’installation
# (par défaut : non (false)).
d-i apt-setup/cdrom/set-first boolean false
# You can choose to install non-free and contrib software.
d-i apt-setup/non-free boolean true
d-i apt-setup/contrib boolean true
# Uncomment this if you don't want to use a network mirror.
#d-i apt-setup/use_mirror boolean false
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
d-i apt-setup/services-select multiselect security, updates
d-i apt-setup/security_host string security.debian.org
 
### Package selection
tasksel tasksel/first multiselect standard
 
# Individual additional packages to install
d-i pkgsel/include string openssh-server 
# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
d-i pkgsel/upgrade select none
 
# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean true
 
## Grub
d-i grub-installer/only_debian boolean true
 
### Finishing up the installation
# During installations from serial console, the regular virtual consoles
# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
# line to prevent this.
#d-i finish-install/keep-consoles boolean true
 
# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note
 
# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
#d-i cdrom-detect/eject boolean false
 
# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true
 
### Preseeding other packages
# Depending on what software you choose to install, or if things go wrong
# during the installation process, it's possible that other questions may
# be asked. You can preseed those too, of course. To get a list of every
# possible question that could be asked during an install, do an
# installation, and then run these commands:
#   debconf-get-selections --installer > file
#   debconf-get-selections >> file
 
 
#### Advanced options
### Running custom commands during the installation
# d-i preseeding is inherently not secure. Nothing in the installer checks
# for attempts at buffer overflows or other exploits of the values of a
# preconfiguration file like this one. Only use preconfiguration files from
# trusted locations! To drive that home, and because it's generally useful,
# here's a way to run any shell command you'd like inside the installer,
# automatically.
 
# This first command is run as early as possible, just after
# preseeding is read.
#d-i preseed/early_command string anna-install some-udeb
# This command is run immediately before the partitioner starts. It may be
# useful to apply dynamic partitioner preseeding that depends on the state
# of the disks (which may not be visible when preseed/early_command runs).
#d-i partman/early_command \
#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
d-i preseed/late_command string apt-install docker.io docker-compose